Prestige Auto Dismantlers

Home / Install guides

Guide

Fitting a used ECU, gearbox or control module

Published 22 November 2026

The part that causes the most disappointment on a luxury car is not the one that breaks, it's the electronic module that doesn't work after it's been fitted. Understanding why saves money.

Before you start

This is general guidance, not a workshop manual. Follow the manufacturer's procedure for your exact car. Leave airbags and restraints, fuel systems and any high-voltage hybrid or electric systems to a qualified workshop.

Why a used module may not just work

Modern cars tie many control units to the vehicle they were built in. Depending on the make and the module, a unit can be linked to the VIN, the immobiliser, the keys or the other modules in the car. Fitted into a different car, it may not be accepted until it is cleared, matched or reprogrammed by someone with the right tools and access.

What to ask before you buy

  • Is this unit plug and play for my VIN, or does it need coding or programming?
  • What are the part number and the software version?
  • Has it been tested, and on which car?
  • For gearboxes, does it include the mechatronic or control unit, and does that need to match the car?

Before you remove the old unit

  • Have the fault codes read and saved.
  • If a workshop can copy the data from the old unit, such as stored mileage or key information, do it before removal.
  • Take photos of connectors and routing.

Fitting

  1. Disconnect the battery. See our battery guide.
  2. Remove the old unit and fit the used one, using the correct connectors and fasteners.
  3. Reconnect the battery.
  4. Take the car to a workshop that can code or program it. Many warning lights are normal until this is done.

Gearboxes

After a used automatic gearbox is fitted, the control unit usually has to relearn how the gearbox behaves. Gear changes can feel rough until the adaptation is reset or completed. A workshop with the right scan tool does this.

Important

Some modules, once coded to a car, can't easily be reused in another. Don't fit a used module to the wrong car to "test it". Ask us before you try.