The intermediate shaft (IMS) bearing sits inside the engine and helps drive the camshafts. On the M96 and M97 flat-six engines in the 996-generation 911, the 986 Boxster and some early 987 and 997 models, it is a known concern.
- Symptoms
- Often none. When the bearing fails the engine can fail suddenly and badly. Metal particles in the oil or on the filter can be an early sign.
- Usual cause
- Bearing wear or failure inside the engine. Only a minority of engines are affected, but the result is severe when it happens.
- Check first
- Ask for service history. Have the oil filter inspected for metal at the next service. Check for oil leaks near the rear of the engine.
- Typical fix
- A preventative replacement with an upgraded bearing, usually done at the same time as a clutch or rear main seal job, because access is shared.
Which engines are involved
The concern applies to the earlier water-cooled flat-six engines. Later engines changed the design. Your VIN identifies exactly which engine your car has.
If the engine has already failed
Repair cost can exceed the value of the car. A used engine is one option, and a rebuilt or replacement engine is another. Ask a specialist which suits your plans for the car.
Looking for a Porsche engine or engine parts?
Send the VIN and the part you need and we'll check what we have.